51

Menu Descriptions & Functions

Source Menu

Enables you to select a video source such as a VCR, laser disc player, computer or document camera depending on what is connected to your inputs. Press the "Select" button on the projector cabinet or (▲) (▼) buttons on your remote control to highlight the menu for the item you want to adjust

Video

Selects what is connected to your Video input-VCR, laser disc player, DVD player, or document camera.

S-Video

Selects what is connected to your S-Video input-VCR, DVD player, or laser disc player.

RGB 1

Selects the computer connected to your RGB 1 input. Use the "Adjust" (+) or (–) buttons to select a standard* or one of six** custom settings you can create. Press the "Enter" button on the cabinet or the "Left Click" button on the remote control to save your selection.

RGB 2

Selects the computer connected to your RGB 2 input. Use the "Adjust" (+) or (–) buttons to select a standard* or one of six** custom settings you can create. Press the “Enter” button on the cabinet or the “Left Click” button on the remote control to save your selection.

NOTE:

If a previously saved custom memory location is used with a new or different input signal it may not sync up, producing a distorted image, or no image at all. If so, follow the instructions below:

1)Disconnect the signal cable so that there is no input signal. In this condition the on-screen message will be displayed.

2)Select RGB1 standard or RGB2 standard from the source menu.

3)Connect the signal cable again.

NOTE:

*Standard is normally used and it can be user changed and automatically recalled.

**”Custom 6” is read only. This feature is useful when an XGA image (1024 2768) is displayed with a notebook computer supported by SXGA (128021024) and when an SVGA image (8002600) is displayed with a notebook computer supported by XGA (10242768)

 

OPERATION

 

52