Set Position This reorients your image for your type of projection. Press the (+) button until you have the correct image orientation. It moves sequentially: front floor projection - rear ceiling projection - rear floor projection - front ceiling projection. Press the￿(- ) to move backward through the sequence.

Maintenance Icons

Picture Adjustment Use this icon with the “Fine Picture Adjustment” to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate banding in the image. Press the (+) and (-) buttons until the banding disapears. This adjustment may be necessary when you hook your computer up for the first time. This adjustment is made automatically when the Auto Picture is turned on.**

Fine Picture Adjustment Use this icon to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when parts of the image apear to be shimmering.) Use the (+) and (-) buttons to adjust the image. Use the Fine Picture Adjustment only after the Picture Adjustment is complete. This adjustment is made automatically when the Auto Picture is turned on.**

39

Using A Tabletop Or Cart

1.Place your LCD projector on a flat level surface at the optimal distance from the screen or wall so you realize the size image you want. (Avoid having bright room lighting or sun light directly on the screen or wall where you’ll be projecting the image.)

2.Connect the power cable, remove the lens cap and turn the projector on. (If no input signal is available, the projector will display a black screen.)

3.Ensure that the projector is square to the screen.

4.Move the projector left or right to center the image horizontally on the screen.

5.To center the image vertically, lift the front edge of the projector and press the buttons on the sides of the projector, just above the feet, to release the one-touch tilt feet.

6.To fine tune the image’s position vertically on the screen, rotate each front foot. (There is approximately 7° of up and down adjustment for the front of

the projector.)

7.Increase or reduce the size of the projected image by pressing the “Zoom” and (+) or (-) buttons on the remote control.

Projection Distance and Image Size

 

350

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(inch)

300

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

250

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Size

200

 

 

 

 

 

 

WIDE

 

 

 

 

 

 

Image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

150

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TELE

 

 

 

 

Diagonal

 

 

 

 

 

 

 

 

 

 

 

 

 

100

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.56

13.12

19.69

26.25

32.81

39.37

ft.

 

0.0

 

 

 

(2.0)

(4.0)

(6.0)

(8.0)

(10.0)

(12.0)

(m)

Projection distance

 

INSTALLATION

 

24