WARNING
•Only use your LCD projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged.
•Do not use the LCD projector where temperatures vary greatly. The projector must be used at temperatures between 32°F (0°C) and 104°F (40°C).
•Do not expose the LCD projector to moisture, dust, or smoke. This will harm the
screen image. | Distance |
h1 = 49.21" (1250 mm) : H = 29.53" (750 mm)
h2 =59.06" (1500 mm) : H =19.69" (500 mm)
h3 =68.90" (1750 mm) : H = 9.84" (250 mm)
H = Distance between the projector bottom and the ceiling
h = Distance between the screen center and the floor
•Ensure that you have adequate ventila- tion around your LCD projector so heat can dissipate. Do not cover the vents on the bottom or back of the projector.
Ceiling Installation
Installing your MultiSync MT600 LCD Projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information.
Do not attempt to install the projector your- self.
118.11" 3000mm |
| |
|
| H |
2˚ |
| |
7.3˚ | Lens position | 39.37" |
1000mm
Height 102.36" 2600mm
Screen size: 80"
h3 h2 h1
47.2"
1200mm
25
Projector Control Icons
Auto Start Turns the LCD projector on automatically when the main power switch is turned on. This eliminates the need to always use the “Power” button on the remote control or projector cabinet.
Auto Picture When on, the “Picture” and “Fine Picture” adjustments are made automatically.**
Speakers Turns the projector’s speakers on and off.
Power Management When “Power Management” is on and there is no RGB video input for five minutes or more, the projector will automatically turn itself off. Note that VIDEO and
Display Mode This toggles your projector between resolutions of 800 x 600 (+) and 640 x 480
OPERATION |
| 38 |
|
|
|