Command Codes (continued)

No.

Function

Code

Data

Description

33

Lamp Reset

27H

No

Lamp usage hour is reset to 0

34

S-VIDEO

C6H

No

Same as remote

35

Brightness

60H

Yes

0 to 63

36

Contrast

62H

Yes

0 to 63

37

Color

64H

Yes

0 to 63

38

Tint

66H

Yes

-32 to +31(E0 to 1F)

39

Sharpness

68H

Yes

0 to 3

40

Audio Volume

6AH

Yes

0 to 63

41

Fine Picture

6EH

Yes

0 to 15

42

Picture Adj

70H

Yes

0 to 255

43

H Position

72H

Yes

-32 to +31(E0 to 1F)

44

V Position

74H

Yes

-32 to +31(E0 to 1F)

61

WARNING

TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED NEC SERVICE PERSONNEL.

RF Interference

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Technologies in this manual. Failure to comply with this government regulation could void your right to operate this equip- ment.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

2