Quick Start
Attach Tilt/Swivel Base
To attach the AccuSync™ monitor to your system, follow these instructions:
1.With the monitor unplugged from your system and the wall outlet, carefully turn the monitor upside fown on a firm table (Figure
2.Position the six hooks of the tilt/swivel base into the six holes on the bottom of the monitor (Figure TS.2).
3.Slide the tilt/swivel base forward until the latch of the tilt/swivel base is secure (Figure TS.3).
4.Having successfully installed your tilt/swivel base, carefully turn the monitor right side up (Figure TS.4).
Bottom of monitor
Top of monitor
Firm Table
Figure | Figure |
Figure
Figure
3
15500371.wpc | 5 | 9/30/99, 5:41 PM |