2. Installation and Connection

2-2. Connecting the image input terminals

Your projector has four image input terminals, namely, the HDSDI A input terminal, the HDSDI B input terminal, the DVI-D A input terminal, and the DVI-D B input terminal.

•HDSDI A/B input terminal (SDI A/SDI B) ------------ Inputs serial digital images from a Video Server or Video source.

•DVI-D A/B input terminal (DVI A/DVI B) ------------- Inputs digital RGB signals from a PC.

75Ω coaxial cable

 

 

 

DVI-D signal cable

 

 

 

 

 

 

 

 

 

 

 

 

 

Ferrite clamp core (accessory)

SDI-A

SDI-B

DVI-A

DVI-B

GPI/O

 

 

 

 

LAN-A LAN-B

 

 

CINEMA

 

 

 

REMOTE

SYSTEM

 

 

 

RS-232C

PCCARD

USB

 

IN

 

 

 

•Information for Reducing Radiation of Electromagnetic Waves

To reduce unnecessary radiation of electromagnetic waves, use the supplied ferrite clamp core.

•Mounting the ferrite clamp core

1 Open the accessory ferrite clamp core and attach it to the DVI-D signal cable.

When doing so, attach this as close as possible to the end that goes to the projector. * Push the catch to open the ferrite clamp core.

2Close the ferrite clamp core tightly.
3 Fix the supplied band to the signal cable as a stopper.

Band

* Pull the end of the band to tighten it. Cut off the surplus of the band.

NOTE Be sure to use the ferrite clamp core at the end of the DVI-D signal cable.

16