6. Appendix
Problem | Check these items |
|
|
The projector cannot be operated | Make sure the remote control transmission unit is facing the light reception unit on the projector. |
with the remote control. |
|
Check whether the batteries are still good. Replace with new batteries. | |
|
|
| Check whether there is any obstructing object between the remote control and the light |
| reception unit on the projector. |
|
|
| Check whether you are outside of the remote control's effective range (7m). |
|
|
| Check whether the remote control cable has become disconnected, if you are using the remote |
| control by connecting with the remote control cable. |
|
|
The STATUS indicator blinks in red. | Your projector may have trouble. Please contact your dealer/distributor for instructions. |
|
|
An error code is displayed. | See the "Error Code List" (page 40). |
|
|
6-2. Indicator display list
See the descriptions below when the blinking or lighting of the two indicators on the projector’s control panel and the rear STATUS indicator on the backside of the projector is observed. The projector also has a warning function that uses a buzzer.
MMS STATUS indicator
MMS
STATUS
POWER indicator
STATUS indicator
6-2-1. POWER indicator
| Indicator condition | Projector condition | Note | |
|
|
|
|
|
Off |
|
| The main power is off. | - |
|
|
|
|
|
Blinking light |
| Green | The projector is getting ready to turn on. | Wait for a moment. |
|
|
| The douser is closed. |
|
|
|
|
|
|
|
| Orange | The projector is cooling down. | Wait for a moment. |
|
|
|
|
|
Steady light |
| Green | The projector is turned on. | - |
|
|
|
|
|
|
| Orange | The projector is in standby. | - |
|
|
|
|
|
6-2-2. STATUS indicator
Indicator condition | Projector condition | Note |
|
|
|
Off | Normal | - |
|
|
|
Blinking light (Red) | Error | An error message is displayed in |
|
| the LCD screen. Check the content |
|
| of the error. |
|
|
|
38