NEC NC800C 1-3-2.Rear of the projector

1. What’s in the Box? and the Names of the Projector Parts

1-3-2. Rear of the projector

5

4

1

2

6 3

1. Air inlet

Air is taken in here to provide cooling of the projector.

2. Air outlet

The heat of the lamp is vented here.

3. Power cord

Connect the power cord to an AC outlet.

4. Function ground

The function ground is used when you wish to establish a common ground potential between the projector and the image- sending device or other equipment.

This is not a power supply ground terminal.

5. Main power switch

Connect the power cord to an AC outlet and set the main power switch to ON, then your projector will enter a standby state.

6. Lamp cover

The lamp house is accommodated. Mount and remove the lamps from here. For lamp mounting and removal, consult with your dealer.

NOTE • Do not cover the air inlet and outlet during operation. Inadequate air intake may lead to a rise in inside temperature, thus causing a fire or serious projector failure.

•Do not touch the air outlet when your projector is operating. Otherwise, the high temperature may cause burns.

6

Contents

DLP Cinema® Projector User’s Manual Important Information Important Information Page Page Page Page (MEMO) Table of Contents Table of Contents 1.What’s in the Box? and the Names of the Projector Parts 2.Installation and Connection 3.Projection of Images (Basic Operation) What’s in the Box? and the Names of the Projector Parts 1-1.Features 1.What’s in the Box? and the Names of the Projector Parts 1-2.What’s in the Box 1-3.Names of the Projector Parts 1-3-1.Front of the projector 1-3-2.Rear of the projector 1-3-3.Connection terminals Page 1-3-4.Control panel Page 1-4.Names on the Remote Control Page Page Installation and Connection 2-1.Steps for setting up and connecting 2-2.Connecting the image input terminals 2-3.Connecting the various control terminal 2-4.Connecting the power cord Projection of Images (Basic Operation) 3-1.Steps of projecting images 3-2.Turning your projector on Page 3-3.Selecting the title of input signal 3-4.Adjusting the position and the size of projected screen 3-4-1.Displaying the test pattern 3-4-2.Adjusting the position of the projected screen (Lens shift) 3-4-3.Fine adjustment of the size of the projected screen (Zoom) 3-4-4.Focusing the projected screen (Focus) 3-4-5.Adjusting the brightness of the projected screen (Lamp output) 3-5.Turning your projector off Using Menus 4-1.Basic operation with adjustment menus 4-1-1.Screen display 4-1-2.Operating menus 3Press the [MENU CTL] DOWN button 4Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Version.” 5Press the [MENU CTL] DOWN button 6Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Data.” 7Press the [MENU CTL] UP button several times 4-1-3.How to enter alphanumeric characters 4-2.Table of adjustment menus 4-3.Title Select 4-3-1.Title select (Title Memory) 4-3-2.Test Pattern 4-4.Configuration 4-4-1.Lamp Setup 4-5.Title Setup 4-6.Information 4-6-1.Lamp 4-6-2.Macro Key 4-6-3.Usage 4-6-4.Error Code 4-6-5.Version 4-6-6.IP Address 4-6-7.MMS Status Maintenance of Your Projector 5-1.Cleaning the Cabinet 5-2.Cleaning the Lens Appendix 6-1.Troubleshooting 6-1-1.Problems and where to check 6. Appendix 6-2.Indicator display list 6-2-1.POWER indicator 6-2-2.STATUS indicator 6-2-3.MMS STATUS indicator 6-3.Error code list Page 6-4.Operation using an HTTP browser 6-4-1.Overview 6-4-2.Preparation before use 6-4-3.Handling of the address for operation via a browser 6-4-4.Structure of the HTTP server 6-5.Outline Drawing 6-6.Specifications Caracteristiques techniques Technische Daten 6-7.Pin Assignment and Functions of Terminal 6-7-1.PC CONTROL connector (D-Sub9 pin) 6-7-2.Remote control input connector (REMOTE IN) (Stereo mini) 6-7-3.LAN port (LAN-A, LAN-B) (RJ-45) 6-7-4.External control connector (GP I/O) (D-Sub37 pin) Page 6-7-5. SDI-A, SDI-B (HD-SDIinput connector) (BNC) 6-7-6. DVI-A, DVI-B(DVI digital Input connector) (DVI-D24 pin) 6-8.Related products list (MEMO) Page 7N8P6422