NEC NC800C 28

3. Projection of Images (Basic Operation)

3Press the POWER button on the control panel of your projector three seconds or longer.

Your projector is turn on, and the screen glows light about 30 seconds later. The POWER indicator of the projector lights up green.

•When controlling with the remote control, press the POWER ON button three seconds or longer.

NOTE • While your projector is on, be sure to have the lens cap removed from the lens. Otherwise, the lens cap may get deformed due to a heat buildup.

•In the following instances, the power to your projector cannot be turned on even if you press the POWER button.

•When the inside temperature is abnormally high. The protective function prevents power from turning on. Wait some time (until the projector inside cools down) and then turn on the power.

•When the STATUS indicator is blinking without the lamp lighting up after power-on. Your projector may be in trouble. Check the error display on the LCD screen and contact your dealer/distributor for instructions.

•Note that the image may sometimes flicker until the lamp has stabilized (5 to 10 minutes) after power-on. This is due to the characteristics of the lamp and is not trouble of your projector.

20

Contents

DLP Cinema® Projector User’s Manual Important Information Important Information Page Page Page Page (MEMO) Table of Contents Table of Contents 1.What’s in the Box? and the Names of the Projector Parts 2.Installation and Connection 3.Projection of Images (Basic Operation) What’s in the Box? and the Names of the Projector Parts 1-1.Features 1.What’s in the Box? and the Names of the Projector Parts 1-2.What’s in the Box 1-3.Names of the Projector Parts 1-3-1.Front of the projector 1-3-2.Rear of the projector 1-3-3.Connection terminals Page 1-3-4.Control panel Page 1-4.Names on the Remote Control Page Page Installation and Connection 2-1.Steps for setting up and connecting 2-2.Connecting the image input terminals 2-3.Connecting the various control terminal 2-4.Connecting the power cord Projection of Images (Basic Operation) 3-1.Steps of projecting images 3-2.Turning your projector on Page 3-3.Selecting the title of input signal 3-4.Adjusting the position and the size of projected screen 3-4-1.Displaying the test pattern 3-4-2.Adjusting the position of the projected screen (Lens shift) 3-4-3.Fine adjustment of the size of the projected screen (Zoom) 3-4-4.Focusing the projected screen (Focus) 3-4-5.Adjusting the brightness of the projected screen (Lamp output) 3-5.Turning your projector off Using Menus 4-1.Basic operation with adjustment menus 4-1-1.Screen display 4-1-2.Operating menus 3Press the [MENU CTL] DOWN button 4Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Version.” 5Press the [MENU CTL] DOWN button 6Press the [MENU CTL] LEFT/RIGHT button to select the submenu “Data.” 7Press the [MENU CTL] UP button several times 4-1-3.How to enter alphanumeric characters 4-2.Table of adjustment menus 4-3.Title Select 4-3-1.Title select (Title Memory) 4-3-2.Test Pattern 4-4.Configuration 4-4-1.Lamp Setup 4-5.Title Setup 4-6.Information 4-6-1.Lamp 4-6-2.Macro Key 4-6-3.Usage 4-6-4.Error Code 4-6-5.Version 4-6-6.IP Address 4-6-7.MMS Status Maintenance of Your Projector 5-1.Cleaning the Cabinet 5-2.Cleaning the Lens Appendix 6-1.Troubleshooting 6-1-1.Problems and where to check 6. Appendix 6-2.Indicator display list 6-2-1.POWER indicator 6-2-2.STATUS indicator 6-2-3.MMS STATUS indicator 6-3.Error code list Page 6-4.Operation using an HTTP browser 6-4-1.Overview 6-4-2.Preparation before use 6-4-3.Handling of the address for operation via a browser 6-4-4.Structure of the HTTP server 6-5.Outline Drawing 6-6.Specifications Caracteristiques techniques Technische Daten 6-7.Pin Assignment and Functions of Terminal 6-7-1.PC CONTROL connector (D-Sub9 pin) 6-7-2.Remote control input connector (REMOTE IN) (Stereo mini) 6-7-3.LAN port (LAN-A, LAN-B) (RJ-45) 6-7-4.External control connector (GP I/O) (D-Sub37 pin) Page 6-7-5. SDI-A, SDI-B (HD-SDIinput connector) (BNC) 6-7-6. DVI-A, DVI-B(DVI digital Input connector) (DVI-D24 pin) 6-8.Related products list (MEMO) Page 7N8P6422