1. What’s in the Box? and the Names of the Projector Parts

11.SELECT  buttons

•Press the SELECT / button when the menu is displayed, and a menu item can be selected.

•Press the SELECT  button when the menu is displayed, and a submenu will be displayed.

•Press the SELECT  button when the menu is displayed, and a menu one level above will be displayed.

•During character entry, press the SELECT  button while depressing the CTL button, then one character will be deleted.

12.ENTER button

Press the ENTER button, and the displayed menu item is actioned.

13. CANCEL button

Press the CANCEL button to return to the previous menu item.

14. FOCUS +/- buttons

Press the FOCUS +/- button while depressing the CTL button, to make lens focus adjustment. (See page 23)

15. ZOOM +/- buttons

Press the ZOOM +/- button while depressing the CTL button, to make lens zoom adjustment. (See page 23)

16. CTL button

The CTL button is a shift function used to access alternative functions on other buttons.

17. Back light switch

When this is set to [ON], the characters on the remote controller will light up.

•When using the remote control with infrared ray signals

If the remote control device is not operated for 30 seconds after turning “ON” the back light switch, the back light switch will automatically extinguish itself. Thereafter, it will light again when the remote control buttons are operated.

•When using the remote control connected to the remote control cable

The back light will constantly light when the power to the projector is turned on and when the projector is in standby status.

NOTE • The following buttons cannot be used with this projector:

WHITE BAL., ADJUST PICTURE, IMAGE, INFO., PIXEL., MUTE SOUND, MUTE OSD, HELP, AUTO, UNDO

Inserting the batteries

[1]Remove the battery case cover on the backside of the remote control.

[2]Insert the UM-3 size AA batteries into the case. Be careful of the direction poles on the batteries.

[3]Restore the cover.

NOTE • When replacing the batteries, always purchase two of the same type of UM-3 size AA batteries.

Effective range of the remote control

To operate the remote control using infrared rays, and not using the remote control cable, point the remote control transmission unit toward the remote control reception unit on the projector. Signals from the remote control can generally be received within the range shown in the figure below.

[Range of reception in the horizontal direction]

Lens

30° 7m

30°

Remote control

Reception unit on projector

(Top view of the projector)

(Note) The effective range depicted in the figure may differ slightly in actual use.

12