Displaying Disc Information on-screen
Some items can be changed using the menu.
1.Press DISPLAY during playback.
2.Press b / B to select an item. The selected item is highlighted.
3.Press v / V to change the setting. Press ENTER. You can also use the number buttons if appropriate (e.g. inputting the title number).
02/04 | : Title(Track) Number, 0:08:20 : Time search |
02/04 | : Chapter Number (DVD disc only) |
Note:
If no button is pressed for a few seconds, the on- screen display disappears.
Initial Settings
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 10 to 13.
To display and exit the Menu:
Press SETUP to display the menu. A second press of SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1.Press SETUP. The Setup menu appears.
2.Use b / B to select the desired option then press V or ENTER to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s).
3.Use v / V to select the second desired option then press B to move to the third level.
4.Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps.
5.Press SETUP, RETURN or PLAY to exit the Setup menu.
LANGUAGE
|
|
|
|
|
|
|
|
|
|
|
|
LANGUAGE |
|
| |||
Menu Language | English |
| |||
Disc Audio | Original |
| |||
Disc Subtitle | Off |
| |||
Disc Menu | Original |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Move | Select | Exit |
Menu Language
Select a language for the Setup menu and
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
Original – Refers to the original language in which the disc was recorded.
Other – To select another language, press number buttons then ENTER to enter the corresponding 4- digit number according to the language code list on page 19. If you enter the wrong language code, press CLEAR.
DISPLAY
DISPLAY |
|
|
TV Aspect | 4:3 |
|
Display Mode | Letterbox |
|
Progressive Scan | Off |
|
TV Output Select | YPbPr |
|
Move | Select | Exit |
TV Aspect
4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect mode is set to “4:3”.
Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen.
Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.
10
