Contents
The audio base contains the
following additional items.
• Audio Base
• Captive Audio Cable
• Audio Base Manual
• Power Cord
Quick Start
If the audio base is not attached to the monitor, please use the following steps to
attach the audio base to the monitor.
If the audio base is already attached to the monitor proceed to Step 1-B.
MAKE SURE THE MONITOR IS DISCONNECTED FROM THE SYSTEM AND
IS UNPLUGGED FROM THE WALL OUTLET BEFORE ANY WORK IS DONE
ON THE MONITOR.
STEP 1-A. With the monitor unplugged from your system and the wall outlet,
carefully turn the monitor upside down on a firm table (Figure 1-A).
STEP 2-A. Position the locking tabs on the audio base with the holes in the
monitor and slide the audio base in place (Figure 2-A).
2
Figure 1-A Figure 2-A
Bottom of monitor
Top of monitor
Firm Table

Audio Base

USER'S MANUAL
AccuSync
®
To learn about other special offers, register online at www.necmitsubishi.com/ productregistration
AudioBase 9/29/00, 11:26 AM4