NEC NLT-23WQ user manual Input, Headphone jack

External Equipment Connection

A/V INPUT

1.Connect the A/V out jacks on of the VCR to A/V- in jacks on the TV.

2.Press the TV/AV button to select VIDEO mode.

3.Press the PLAY button on the VCR.

The VCR playback picture appears on the screen.

Note. If you have a mono VCR, connect the audio cable from the VCR to the L(MONO) socket of set.

Side of set

Rear of set

A/V OUT

1.Connect the Audio outputs(L,R) of the TV to Audio-IN(L, R) of another displayer or the amplifier system - lf you connect the amplifier system, you can also play the TV sound through the stereo amplifier system.

2.Connect the Video output of the TV to Video IN of another displayer.

Note. lf you press the mute button, only the sound of the TV's speaker are switched off.

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the sound through the headphone; no sound from the speaker on the TV. To adjust the headphone volume, press the Ïq button. If you press the MUTE button, the sound from the headphone is turned off.

Headphone

A/V-IN2

Side of set

24