4. Convenient Features

Changing Eco Mode

This feature enables you to select two brightness modes of the lamp:

OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].

[ECO MODE]

Description

Status of LAMP indicator

 

[OFF]

This is the default setting (100% Brightness).

Off

LAMP

 

 

 

STATUS

[ON]

Select this mode to increase the lamp life (approx.

Steady Green light

LAMP

 

90% Brightness.)

 

 

 

STATUS

 

 

 

To turn on the [ECO MODE], do the following:

1.Press the ECO MODE button on the remote control to display [ECO MODE] screen.

2.Use the or button to select [ON].

3.Press the ENTER button.

To change from [ON] to [OFF], Go back to Step 2 and select [OFF]. Repeat Step 3.

NOTE:

The [ECO MODE] can be changed by using the menu. Select [SETUP] [GENERAL] [ECO MODE].

The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] [USAGE TIME].

The projector will always enter into the [ECO MODE] [OFF] condition for 60 seconds immediately after the projector is turned on. The lamp condition will not be affected even when [ECO MODE] is changed within this time period.

After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to [ON]. This is done only when [ECO MODE] is set to [OFF].

If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. When the projector is in [ON] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode.

Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to [ON] mode because the internal temperature is too high.

ID SET

0

CLEAR

AV-MUTE FREEZE

MENU EXIT

 

 

ENTER

 

 

M

 

 

 

E

N

 

 

 

A

 

 

 

 

G

 

 

G

I

 

F

A

 

 

Y

P

 

 

L-CLICKR-CLICK

MOUSE

ECO MODEKEYSTONEPICTURE

HELP FOCUS ASPECT VOL.

ZOOM

30