4. Convenient Features
Follow the steps to display the 3D menu.
1.Press the MENU button.
The [SOURCE] menu will be displayed.
[NP215/NP210/NP115/NP110][NP216]
2.Press the button twice.
The [SETUP] menu will be displayed.
3.Press the button once, and then press the button four times.
The [3D] menu will be displayed
[NP215/NP210/NP115/NP110][NP216]
Selecting input connected to a source of 3D images [COMPUTER / VIDEO /
This function switches the 3D mode between ON and OFF for each input.
NOTE:
To confirm that the supported 3D signal is accepted, use either way of the following:
-Make sure that [3D] is displayed in the top right of the screen after the source is selected.
-Display [INFO.] → [SOURCE] → [3D SIGNAL] and make sure that "SUPPORTED" is displayed.
Enabling DLP® Link to view 3D images [DLP® Link]
To use DLP® Link compatible LCD shutter eyeglasses, select [ON].
To use other LCD shutter eyeglasses such as IR or wired LCD shutter types, select [OFF].
If you use LCD shutter eyeglasses that are not compatible with DLP® Link, the LCD shutter eyeglasses may not synchronize to the projector properly.
41