42
5. Using On-Screen Menu
[Setup - Installation]
Selecting Projector Orientatio n [Orientation]
This sets your image for your type of projection applicati on. The options are:
desktop front projection, ceiling rear projection, d esktop rear projection, and ceiling front projection.
Desktop front Ceiling rear
Desktop rear Ceiling front
Selecting Communication Sp eed [Communication Speed]
This feature sets the baud rate of the PC Control port (Mini DIN 8 Pin). It suppor ts data rates from 4800 to 38400
bps.
The default is 38400 bps.
Select the appropriate baud rate for your equipment to be con nected (depending on the equipment, a lower baud
rate may be recommended for long cable runs).
NOTE: Your selected communication speed will not be affected even when [Rese t] is done from the menu.
Disabling the Cabinet Buttons [Co ntrol Panel Lock]
This option turns on or off the Key Lock function for cabinet b uttons.
NOTE:
The Control Panel Lock setting will not affect the remote control or PC Control Func tions.
When the cabinet buttons are disabled, pressin g and holding the EXIT button for about 10 seconds will change the s etting to
enable.
The Key Lock icon will be displayed at the bottom right of the menu wh en Control Panel Lock is enabled.
•
•
•