NEC NP60 - page 48

5. Using On-Screen Menu

NOTE:

When you are displaying an RGB image with a higher resolution th an the projector's native resolution, the image will be dis -

played in [Normal] even if [Native] is selected. Only when displaying an RGB im age with a lower resolution than the projec-

tor's native resolution, will the image be able to be displ ayed in its true resolution [Native].

When [Normal] is selected, an HDTV (1080i/720p) signal will be shown in its true aspect, as is the ca se when selecting [Cinema].

You can adjust the image position for Cinema asp ect. See [Cinema Position] for setting the ima ge position.

Please note that using this projector for the purpose of c ommercial gain or the attraction of public attenti on in a venue such as

a coffee shop or hotel and employing compressio n or expansion of the screen image with a [Aspect Ratio] setting ma y raise

concern about the infringement of copyrights which are protecte d by copyright law.

Adjusting the Vertica l Position of Image [Cinema Position] (for Cin ema only)

This feature adjusts the vertical position of the i mage when viewing video with Cinema aspect rati o selected.

When [Cinema] is selected in [Aspect Ratio], the image is displayed with b lack borders on the top and bottom.

You can adjust the vertical position from the top to the bottom of th e black area.

NOTE: This option is available only when “Cinema” is selected in A spect Ratio.

Adjusting Horizont al/Vertical Position, Clock and P hase [Position/Clock]

You can adjust the image manually for position and stability; [H orizontal], [Vertical], [Clock] and [Phase].

[Horizontal/Vertical] (available for RGB signal only)

Adjusts the image location horizontally and vert ically.

[Clock] (available for RGB signal only)

Use this item to  ne tune the computer image or to remove any vertical banding that might appear. This func-

tion adjusts the clock frequencies that elimi nate the horizontal banding in the image. This adjustment may be

necessary when you connect your computer for the  rst time.

[Phase] (available for RGB signal only)

Use this item to adjust the clock phase or to reduce video no ise, dot interference or cross talk. (This is evident

when part of your image appears to be shimmering.)

Use [Phase] only after the [Clock] is complete.

• Performing the [Horizontal], [Vertical], [Clock] or [Phase] functi on will store the adjustment values of the cur-

rently projected source into the projector’s memory.

The next time the same source (same resolution, horizontal and vertica l frequencies) is projected; the projec-

tor will call up from memory the stored values for the sourc e.

To clear the stored adjustment values, select the [Reset] → [Current Signal] or [All Data] from the menu to re-

set the adjustment values.

Turning on Noise Reduction [Noise R eduction]

Turn on or off the noise reduction feature. To reduce video noise, select On.

NOTE:

This feature is not available for 480p, 576p, 720p, 1080i and RGB signals

Noise reduction set to off gives best image qu ality by way of higher bandwidth. Noise red uction set to on softens the image.

Setting Telecine Mode [Telecine]

Use 3:2 or 2:2 pull down correction to eliminate jitter and artifacts in video.

Auto .......................For ﬁ lm source such as a DVD player.

Off .........................For sign als other than ﬁ lm sources.

NOTE: This feature is not available for 480p, 576p, 720p, 1080i and RGB signals

•