Appendix
If you need detailed information about the controls, please use the advanced menu.
<How to use the advanced menu>
¥Turn off your monitor.
¥Turn on your monitor by pushing the ÒPOWERÓ and ÒSELECTÓ button at the same time for at least one second simultaneously. Then press the control buttons (EXIT, LEFT, RIGHT, UP, DOWN).
¥You will see the Advanced menu.
This menu is larger than the normal OSD.
<How to exit the advanced menu>
¥Turn off and restart your monitor in the normal way.
To make an adjustment, ensure that the tag is highlighted, then press ÒSELECTÓ.
To move to another tag, press ÒEXITÓ, then press ÒLeftÓ or ÒRightÓ to highlight another tag.
Tag1 | Brightness | Adjusts the overall image and screen background brightness. |
|
| Press ÒLeftÓ or ÒRightÓ to adjust. |
|
|
|
| Contrast | Adjusts the image brightness and contrast in relation to the background. |
|
| Press ÒLeftÓ or ÒRightÓ to adjust. |
|
|
|
| Auto Contrast | Adjusts the image displayed for |
| (Analog input only) | Any adjustment requires the image to have white portions. |
|
|
|
| Auto Black Level | Automatically adjusts the black level. Any adjustment requires the image to have black |
| (Analog input only) | portions. Press ÒSELECTÓ to activate Auto Adjust. |
|
|
|
| ECO Mode | Decreases the amount of power consumed by reducing the brightness level. |
|
| OFF: Set brightness variable range from 0% to 100%. |
|
| 1: Set brightness variable range from 0% to 75%. |
|
| 2: Set brightness variable range from 0% to 50%. |
|
| CUSTOM: Decreases the brightness level as determined by the user. |
|
|
|
| ECO Mode Custom | Allows the user to set a preferred brightness level when ECO Mode is in use. |
|
|
|
| Auto Brightness | OFF: No function. |
|
| ON: Adjusts the brightness automatically, by detecting the brightness level of your |
|
| environment and adjusting the monitor with your BRIGHTNESS setting. |
|
| NOTE: Do not cover environmental brightness sensor (Ambibright sensor). |
|
|
|
| Black Level | Allows you to manually adjust the black level. Press ÒLeftÓ or ÒRightÓ to adjust. |
|
|
|
| LOW BRIGHTNESS | ON: Reduces the brightness level. |
|
| OFF: Default setting. |
|
|
|
Tag2 | Auto Adjust | Automatically adjusts the Image Position and H.Size settings and Fine settings. |
| (Analog input only) | Press ÒSELECTÓ to activate Auto Adjustment. |
|
|
|
Tag3 | LEFT/RIGHT | Controls Horizontal Image Position within the display area of the LCD. |
| (Analog input only) | Press ÒLeftÓ or ÒRightÓ to adjust. |
|
|
|
| DOWN/UP | Controls Vertical Image Position within the display area of the LCD. |
| (Analog input only) | Press ÒLeftÓ or ÒRightÓ to adjust. |
|
|
|
| H. Size | Adjusts the horizontal size of the screen. |
| (Analog input only) | If the ÒAUTO Adjust functionÓ do not give you a satisfactory picture setting, a further |
|
| tuning can be performed using the ÒH.Size (V.Size)Ó function (dot clock). For this a MoirŽ |
|
| test pattern could be used. This function may alter the width of the picture. Use left/Right |
|
| Menu to center the image on the screen. If the H.Size (V.Size) is wrongly calibrated, the |
|
| result would look like on the left drawing. The image should be homogeneous. |
|
|
|
| Fine | Improve focus, clarity and image stability by increasing or decreasing this setting. |
| (Analog input only) | If the ÒAuto Adjust functionÓ and the ÒH.SizeÓ function do not give you a satisfactory |
|
| picture setting, a fine tuning can be performed using the ÒFineÓ function. For this a MoirŽ |
|
| test pattern could be used. If the Fine value is wrongly calibrated, the result would look |
|
| like on the left drawing. The image should be homogeneous. |
|
|
|
| Sync Threshold | Adjusts the slice level of a synchronization signal. Adjusts the sensitivity of the separate |
| (Analog input only) | or composite input signals. |
|
| Try this option if the FINE adjustment does not successfully eliminate the noise. |
|
|
|
