BASIC PREPARATION
Before using
Wipe the appliance inside and outside using a cloth dampened with warm water and small amount of mild deter- gent.
After plugging in for the first time, allow the refrigerator to stabilize for at least 1~2 hours before storing food.
WARNING
-Keep ventilation openings in the appliance enclosure or in the
-Do not use mechanical devices or other means to accelerate the defrosting process. other then those recommended by the manufacturer.
-Do not damage the refrigerant circuit(applicable only for appliances with refriger- ation circuits which are accessible to the user)
-Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer.
-Damaged supply cords must be replaced by a special cord or assembly avail- able from the manufacturer or its service agent.
-When disposing the refrigerators; should be followed the disposal law of your country.
How to use the water dispenser
Preparation
before using the water dispenser
1.Clean the water tank before use by rinsing with potable water to remove dust and odor which may be in the tank.
2.Fill the water tank with potable drinking water.
3.Push dispenser lever with a glass and discard the first
4.Dispensing water for the first time might be delayed for
USE | Cleaning |
Push the lever with glass to water dispenser.
When refilling is needed,slide cover to the left and pour in the water (only potable drink- ing water should be used).
Remove the connect- | Lift the tank and tilt out- |
wards. |
*Depending on model
6
