Clean Before Using

After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

¹⁄₂" (1.25 cm)

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for 1"

(2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge side (some models require more) to allow for the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

2¹⁄₂" (6.3 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the refrigerator to OFF. Depending on your model, turn the freezer control to the word OFF, or press the Freezer down arrow or minus sign touch pad until a dash (–) appears in both the Freezer and Refrigerator displays as shown. Disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the temperature controls to the desired setting. See “Using the Controls.”

3

Page 3
Image 3
Maytag W10366206A Location Requirements, Electrical Requirements, Clean Before Using, Recommended Grounding Method

W10366206A specifications

The Maytag W10366206A is a highly regarded kitchen appliance, specifically designed as a replacement part for various Maytag appliances. This component showcases the brand's commitment to quality and durability, ensuring that it meets the demanding needs of everyday use in modern kitchens.

One of the standout features of the W10366206A is its robust construction. Made with high-quality materials, it is engineered to withstand the rigors of frequent operation, contributing to the longevity of the appliance it serves. This durability is a hallmark of Maytag, a brand known for its emphasis on reliability and performance.

The W10366206A is compatible with a range of Maytag models, which adds to its appeal. This versatility allows consumers to replace worn or damaged parts without the need to purchase an entirely new appliance. This not only saves money but also reduces waste, aligning with sustainable practices that many consumers value today.

In terms of technology, the W10366206A embodies innovative design. This part is designed with precision to ensure a seamless fit and effective operation within your kitchen appliance. Its design includes features that facilitate easy installation, making it a user-friendly option for those who might prefer to make repairs themselves.

Another important characteristic of the W10366206A is its efficiency. By ensuring that appliances operate at their optimal levels, this replacement part contributes to energy savings, which is increasingly important in today’s eco-conscious environment. With energy-efficient performance, consumers can expect to see reductions in utility bills while enjoying consistent service from their Maytag appliances.

Moreover, Maytag's commitment to customer satisfaction is evident in the extensive testing and quality control that the W10366206A undergoes before reaching consumers. This rigorous process ensures that every part meets high standards of performance, giving users peace of mind in their investment.

In conclusion, the Maytag W10366206A presents a combination of durability, compatibility, innovative technology, and efficiency that make it a valuable component in any kitchen setting. Whether you are looking to maintain your appliance’s performance or make a simple upgrade, this replacement part stands as a testament to Maytag’s reputation for excellence. Investing in the W10366206A is choosing reliability and quality that consumers can trust.