Kodak 5500 manual Clean the Scanner Glass, Clean the Scanner Lid, Format Memory Card

Chapter 8

Clean the Scanner Glass

To ensure that your copies and scans remain clear, keep the scanner glass and lid backing clean and dust the exterior.

1Turn off the EasyShare AiO and raise the lid.

2Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.

WARNING

Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the glass and damage the device.

3Dry the glass with a lint fee cloth.

Clean the Scanner Lid

Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak EasyShare AiO.

1Turn off the EasyShare AiO and raise the lid.

2Clean the lid underside with a soft cloth or sponge slightly moistened with a mild soap and warm water.

3Wipe the underside gently to loosen debris. Do not scrub.

4Dry the underside with a chamois or soft cloth.

WARNING

Do not use paper-based wipes, as these might scratch the underside.

5If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the underside thoroughly with a damp cloth to remove any residual alcohol.

Format Memory Card

Formatting will erase all the data on a memory card.

1Insert a memory card into the appropriate slot.

2Press Menu.

3Press b until Format Memory Card is selected.

4Press OK.

5Press Start to begin formatting.

84 Kodak EasyShare 5500 AiO