Chapter 1
Card Slot Light
Light Status | Cause | Action/Solution |
Light is off. | An SD/MMC card is not inserted | Remove and reinsert the |
| or is improperly inserted in the | SD/MMC card. |
| card slot. |
|
Light is on. | An SD/MMC card is properly | None |
| inserted in the card slot. |
|
Light blinks green. | Slow blink: The internal card | None |
| reader is initializing or |
|
| communicating with the printer. |
|
| Fast blink: There is a card or | Remove the card and make sure |
| communication error. | the card is not “write” protected |
|
| or damaged. Reinsert the card or |
|
| replace with a new card if |
|
| necessary. |
LCD Display Screen
The LCD screen displays photos, messages, instructions, and menu parameters. Menu navigation is accomplished with the
Instructions displayed on photos appear up to four seconds and then disappear, or disappear immediately after you start interacting with the screen. The instructions will return after fifteen seconds of inactivity.
When a second page of display text is present, it is indicated by the down arrow b symbol, positioned in the lower right corner of the menu area. When the second or subsequent page of text is in view, the presence of a previous page is indicated by the up arrow a symbol in the top of right corner of the menu area.
Each time you press Navigate Down (b), you advance the highlight down 1 row. When the last row is highlighted, pressing b causes page 1 to be replaced with page 2. When page 2 appears, the highlight is on the top row. The up arrow a symbol appears at the right edge. If a third page of menu parameters is available, the down arrow b symbol appears in the lower right corner. Until the highlight is advanced, pressing Navigate Up (a) returns you to the previous page. Holding down any of the
8 | Kodak EasyShare 5500 AiO |