Kodak 5500 manual Scene Balance, Add Date to Prints, Button Sounds, Minutes to Standby

Models: 5500

1 120
Download 120 pages 51.95 Kb
Page 26
Image 26
Scene Balance

Chapter 2

Scene Balance

Your EasyShare AiO is configurable to apply automatic scene balance improvements (brightness) for photos printed on the AiO from camera cards, USB connected devices, and wireless devices. The default is to apply the scene balance improvements.

1Press Menu to display the main menu.

2Press b to select Photo Print Settings.

3Press OK.

4Press b until Scene Balance is selected.

5Press _ or ` to enable or disable Scene Balance.

6Press OK.

Add Date to Prints

You can set your EasyShare AiO to print the date a picture was taken on the photo print. The default is to not print the date.

1Press Menu to display the main menu.

2Press b to select Photo Print Settings.

3Press OK.

4Press b until Add Date to Prints is selected.

5Press _ or ` to enable or disable date printing.

6Press OK.

Button Sounds

You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the Control Panel. The default setting is to beep.

1Press Menu to display the main menu.

2Press b until Control Panel Settings is selected.

3Press OK.

4Press _ or ` to enable or disable button sounds.

5Press OK.

Minutes to Standby

When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby state, any activity such as a single button press, or inserting camera card, brings the EasyShare AiO out of the Standby state and returns it to the Ready state.

NOTE: Faxes and print jobs from wireless devices (included PC’s linked over the WLAN) can be received while in standby.

22

Kodak EasyShare 5500 AiO

Page 26
Image 26
Kodak 5500 manual Scene Balance, Add Date to Prints, Button Sounds, Minutes to Standby