Kodak 5500 manual Fax Line with Modem, Chapter

Chapter 2

Your All-in-One will not be able to distinguish between fax and voice calls with this connection. Therefore you will need to answer faxes manually.

When you receive a fax call, press Fax. The EasyShare AiO will answer the call and display Printing Incoming Fax.

Fax Line with Modem

Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you have a fax line on which you receive no voice calls, and you also have a modem connected on this line.

NOTE: Since your modem shares the telephone line with your EasyShare AiO, you will not be able to use both your computer modem and fax simultaneously. For example, while you are sending and receiving faxes, you will not be able to Email or access the Internet.

1Disconnect the phone cord from the wall jack that connects your modem to the telephone wall jack and plug it into the port labeled 2-EXTon your All-in-One.

2Connect the phone cord supplied with your All-in-One to your telephone wall jack and the port labeled 1-LINE.

3Set Answering Machine Mode on your All-in-One to On.

4If your modem software is set to automatically receive faxes to your computer, set it to Off.

When the phone rings, your EasyShare AiO will answer automatically after the number of rings you set in the Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive the fax.

26 Kodak EasyShare 5500 AiO