2.Standard Server Features, Description

ProServa	Intel Pentium 133-MHz 2-way SMP processor
PH SMP-2/133 High	32-MB system memory
Availability System	1 MB synchronous secondary cache per processor
	Intel EtherExpress PRO/100B Adapter LAN board
	Two, 2-GB Fast/Wide SCSI-2 hard disks
	4X SCSI CD-ROM reader
	LANDesk Server Monitor Module
	2-channel PCI Raid Module
	3 1/2-inch diskette drive
ProServa	Intel Pentium 133-MHz quad-processors
PH SMP-4/133 Network	64-MB ECC system memory
Ready System	1-MB synchronous secondary cache per processor
	Intel EtherExpress PRO/100B Adapter LAN
	One, 2-GB Fast/Wide SCSI-2 hard disk
	4X SCSI CD-ROM reader
	3 1/2-inch diskette drive
ProServa	Intel Pentium 133-MHz quad-processors
PH SMP-4/133 High	64-MB ECC system memory
Availability System	1-MB synchronous secondary cache per processor
	Intel EtherExpress PRO/100B Adapter LAN
	Two, 2-GB Fast/Wide SCSI-2 hard disks
	4X SCSI CD-ROM reader
	LANDesk Server Monitor Module
	2-channel PCI RAID Module
	3 1/2-inch diskette drive

Standard Server Features

Table 1-2 describes the server's standard features.

Table 1-2. Standard Server Features

Feature			Description

Two-Segment PCI			Fully PCI 2.1 compliant bus performance at 33 MHz with a
Bus			bandwidth of up to 133 MB/second. The two 32-bit segments
			provide maximum system performance.
EISA Bus			Fully EISA 3.12 compliant bus performance at 8.33 MHz with a
			bandwidth of up to 33 MB/second.
Single to 4-Way			Two CPU module expansion slots support up to two CPU modules,
Pentium Processor			each containing up to two Pentium processors. Dual/quad
Support			processing enhances system performance and enables symmetric
			multiprocessing (SMP) on supported operating systems. Onboard
			L1 cache has 8K each for code and data.
Advanced Programmable			APIC controls interrupt detection and notification, and is
Interrupt Controller (APIC)			used in conjunction with SMP. Use of APIC reduces the load
			on the system bus, as the APIC uses a serial bus to transmit
			and receive interrupts.