14
Information
䡵 Supported resolution
See page 41 for details on the display output of the
various VESA signal standards supported by the
monitor.
䡵 When 852 (848) dot ⳯ 480 line wide VGA*
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT mode
referring to the“Table of Signals Supported” on page
41.
* “ IBM PC/AT” and “VGA” are registered trademarks
of IBM, Inc. of the United States.
Note:
Do not allow the displayed in 4:3 mode for an
extended period. This can cause a phosphor burn-in.
Wide Screen Operation withComputer Signals
Switch to the wide screen mode to expand the 4 : 3 image
to fill the entire screen.
1.Press the WIDE button on the remote control.
2.Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
→ NORMAL → FULL → ZOOM
NORMAL size screen (4:3 or SXGA 5:4)
The picture has the same size as the normal computer
image.
FULL size screen
The image is expanded in the horizontal direction.
ZOOM size screen
When wide signals are input.
FULL size screen