18
Picture Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select PICTURE, then
press the MENU/ENTER button.
The PICTURE screen appears.
2. Use the and buttons to select CONTRAST.
PICTURE 1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
: NORMAL
: OFF
SEL. RETURN
ADJ.
3. Use the and buttons to adjust the contrast.
CONTRAST
* If neither the or button is pressed within 5 seconds,
the current setting is set and the previous screen
reappears.
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Note:
If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure
PICTURE MODE is not set to DEFAULT.
Information
Picture adjustment screen
CONTRAST ....Changes the pictures white level.
BRIGHTNESS
..Changes the pictures black level.
SHARPNESS ..Changes the pictures sharpness.
Adjusts picture detail of VIDEO
display.
COLOR ...........Changes the color density.
TINT ................Changes the pictures tint. Adjust for
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select DEFAULT under the PICTURE MODE
settings.

Setting the picture mode according to the

brightness of the room

There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the “THEAT. 1” mode
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select PICTURE, then
press the MENU/ENTER button.
The PICTURE screen appears.
2. Use the and buttons to select PICTURE
MODE.
PICTURE 1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
: NORMAL
: OFF
SEL. RETURN
ADJ.
3. To set to “THEAT. 1” ...
Use the and buttons to select THEAT. 1.
The mode switches as follows when the and
buttons are pressed:
NORMAL THEAT. 1 THEAT. 2 DEFAULT
PICTURE MODE : THEAT. 1
* If neither the or button is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
4. Once the adjustment is completed ...
Press the EXIT button to return to the main menu. To
delete the main menu, press the EXIT button once more.
Information
Types of picture modes
THEAT. 1, 2......Set this mode when watching video in
a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT . 2.
NORMAL .........Set this mode when watching video in
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
DEFAULT......... Use this to reset the picture to the
factory default settings.