37
P. ON DELAY (Power on delay)
Use this function to activate power-on delay.
Turn on the AUTO ID before the following operations.
Example: Setting ON
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select P. ON DELAY.
4. Use the and buttons to select ON.
The mode switches as follows each time the or
button is pressed:
OFF ON
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 1
: SPLIT
: OFF
: ON
: OFF
: OFF
SEL. RETURN
ADJ.
Information
P. ON DELAY settings
ON...... Turns on the main power of each display after
a delay time.
OFF .... Turns on the main power of all displays at the
same time.
* Once this function has been set to ON, POWER ON/
OFF button on the remote control does not function
except for the No.1 monitor.
By pressing the POWER ON button on the remote
control the No.1 monitor will turn on and the others
will be turned on one by one automatically.
* From the second monitor onward, neither the POWER
button on the unit nor the POWER ON button on the
remote control does function. However, by pressing and
holding the POWER ON button for more than 3 seconds,
the monitor will be turned on.
PLE LINK
Use this function to set a uniform brightness for each
display.
Turn on the AUTO ID before the following operations.
Example: Setting ON
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select PLE LINK.
4. Use the and buttons to select ON, then press the
MENU/ENTER button.
The mode switches as follows each time the or
button is pressed:
OFF ON
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 1
: SPLIT
: OFF
: OFF
: ON
: OFF
SEL. RETURN
ADJ.
Information
PLE LINK settings
ON...... Sets a uniform brightness for each screen in a
2×2 video wall.
OFF .... Sets the individual screen brightness for each
screen in a 2×2 video wall.
* Set OFF in a 3×3 video wall.
* When this function is set ON, connect your plasma
displays with the remote cable (optional) in the order of
the position numbers for the 2×2 video wall. See the
drawing below.
* If there are changes in the DIVIDER or POSITION,
the PLE LINK will automatically turn OFF.
Note:
The remote control can be operated unless the
IR REMOTE is set to OFF.
REMOTE
IN
REMOTE
IN
REMOTE
OUT
REMOTE
OUT
REMOTE
IN
REMOTE
OUT
REMOTE
OUT
REMOTE
IN
No.1No.2
No.3No.4
No.1No.2
No.3No.4
No.1No.2
No.3No.4
No.1No.2
No.3No.4
Display 1 Display 2
Display 4 Display 3