NEC PX-50XM4G Option1 Settings Menu, 4-25, Setting the on-screen menu, Setting the BNC connectors

CONFIDENTIAL

Option1 Settings Menu

Setting the on-screen menu

This sets the position of the menu, the display format (horizontal or vertical) etc.

Example: Turning the DISPLAY OSM off

On “ OPTION1” menu, select “ OSM” , then press the MENU/ ENTER button.

The “ OSM” menu appears.

On “ DISPLAY OSM” of “ OSM” menu, select “ OFF” .

			OSM
	DISPLAY OSM			:	OFF
OSM ADJ.				:	1
OSM ANGLE				:	H
OSM ORBITER				:	OFF
OSM CONTRAST				:	LOW
		SEL.	ADJ.			RETURN
					EXIT

Information

⬛DISPLAY OSM settings ON: The on-screen menu appears.

OFF: The on-screen menu does not appear.

If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON).

⬛OSM ADJUST settings

Adjusts the position of the menu when it appears on the screen.

The position can be set between 1 to 6.

⬛OSM ANGLE settings

Sets the display format (landscape “ H” or portrait “ V” ). When the unit is installed vertically set the OSM

ANGLE at “ V” .

“H”

“V”

OPTION1

1 / 4

OPTION1

OSM

OSM

BNC INPUT

:

RGB

D-SUB INPUT

:

RGB

BNC INPUT

RGB SELECT

:

AUTO

:

RGB

HD SELECT

:

1080B

D-SUB INPUT

INPUT SKIP

:

OFF

:

RGB

ALL RESET

:

OFF

RGB SELECT

NEXT PAGE

:

AUTO

SEL.

MENU/ENTER

OK

EXIT

RETURN

HD SELECT

:

1080B

INPUT SKIP

:

OFF

ALL RESET

:

OFF

1024×768

SEL.

MENU/ENTER

OK

EXIT

RETURN

⬛OSM ORBITER settings

ON: The position of the menu will be shifted by eight dots each time OSM is displayed.

OFF: OSM will be displayed at the same position.

⬛OSM CONTRAST settings NORMAL: OSM brightness is set to normal. LOW: OSM brightness is set to lower.

Setting the BNC connectors

Select whether to set the input of the 5 BNC connectors to RGB, component or SCART1,2.

Example: Set the BNC INPUT mode to “COMP.”

On “ BNC INPUT” of “ OPTION1” menu, select “ COMP.” .

			OPTION1		1 / 4
OSM
	BNC INPUT			:	COMP.
D-SUB INPUT				:	RGB
RGB SELECT				:	AUTO
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Information

⬛BNC INPUT Settings

RGB: Use the 5BNC terminals for RGB input.

COMP.: Use the 3BNC terminals for component input.

SCART1: Use the 4BNC terminals for RGB with composite sync. See page E-8.

SCART2: Use the 3BNC terminals for RGB and the VIDEO1 terminal for composite sync. See page E-8.

Setting the RGB1 connector

Select one of the signals being transmitted to the RGB1 terminal.

Example: Set the D-SUB INPUT mode to “SCART3”

On “ D-SUB INPUT”				of “ OPTION1” menu, select
“ SCART3” .
				OPTION1	1 / 4
	OSM
	BNC INPUT			:	RGB
		D-SUB INPUT		:	SCART3
	RGB SELECT			:	AUTO
	HD SELECT			:	1080B
	INPUT SKIP			:	OFF
	ALL RESET			:	OFF
			NEXT PAGE
			SEL.	ADJ.	EXIT	RETURN

Information

⬛D-SUB INPUT Settings

RGB: Use the D-SUB terminal for RGB input.

SCART3: Use the D-SUB terminal for RGB signal fed from SCART. See page E-8.

Setting a computer image to the correct RGB select screen

With the computer image, select the RGB Select mode for a moving image such as (video) mode, wide mode or digital broadcast.

Example: Setting the “RGB SELECT” mode to “MOTION ”

On “ RGB SELECT” of “ OPTION1” menu, select “ MOTION” .

			OPTION1		1 / 4
OSM
BNC INPUT				:	RGB
D-SUB INPUT				:	RGB
	RGB SELECT			:	MOTION
HD SELECT				:	1080B
INPUT SKIP				:	OFF
ALL RESET				:	OFF
		NEXT PAGE
		SEL.	ADJ.		EXIT	RETURN

Downloaded From TV-Manual.com Manuals E-21

4-25