NEC PX-50XM4G Remote Control, 4-13, u EXIT, q POWER ON/STANDBY Switches the power on/standby

CONFIDENTIAL

Remote Control u EXIT

qPOWER ON/STANDBY Switches the power on/standby.

(This does not operate when POWER/STANDBY indicator of the main unit is off.)

wRGB/PC

Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT SELECT button on the monitor.

eDVD / HD

Press this button to select DVD/HD as the source. DVD/HD can also be selected using the INPUT SELECT button on the monitor.

rVIDEO

Press this button to select VIDEO as the source.

→VIDEO1 → VIDEO2 → VIDEO3

VIDEO can also be selected using the INPUT SELECT button on the monitor.

tMENU/ENTER

Press this button to access the OSM controls.

Press this button during the display of the main menu to go to the sub menu.

yCURSOR (▲ / ▼ /  / )

Use these buttons to select items or settings and to adjust settings or switch the display patterns.

Press this button to exit the OSM controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.

iPOINTER

Press this button to display the pointer.

oZOOM (+ /–)

Enlarges or reduces the image.

!0VOLUME (+ /–)

Adjusts the audio volume.

!1MUTE

Mutes the audio.

!2WIDE

Automatically detects the signal and sets the aspect ratio. Wide button is not active for all signals.

!3DISPLAY

Displays the source settings on the screen.

!4OFF TIMER

Activates the off timer for the unit.

!5SIDE BY SIDE

Press this button to show a couple of pictures in the side-by-side mode.

!6PICTURE IN PICTURE

Press this button to show a couple of pictures in the picture-in-picture mode.

!7SINGLE

Cancels the split screen mode.

!8SELECT/FREEZE

Press this button to select the active picture in a split screen mode.

When the PIC FREEZE function is operating, this button can be used to display still images on the sub screen.

!9AUTO ADJUST

Press this button to adjust Fine Picture, Picture ADJ, Position, and Contrast automatically, or to switch the screen size to ZOOM mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

@0ID SELECT

Set the ID number in the remote control. The remote control can then be used only for a display with the same ID number. When several displays are used together they can be controlled individually.

@1CLEAR/SEAMLESS SW

Clears the number set by the ID SELECT button. When the SEAMLESS SW function is operating, this button can be used to switch the input source quickly.

@2Remote control signal transmitter

Transmits the remote control signals.

@3Remote Jack

Insert the plug of the remote cable (The 1/8 Stereo Mini cable) here when using the supplied remote control in the wired condition.

Downloaded From TV-Manual.com Manuals E-9

4-13