![](/images/new-backgrounds/1158150/15815071x1.webp)
3. Projecting an Image (Basic Operation)
Turning off the Projector
To turn off the projector:
First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the re- mote control. The “Power Off / Are you sure?” message will appear.
Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.
The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds
Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 sec- onds.
Finally, turn off the Main Power switch. The power indica- tor will go out.
LAMP |
|
|
STATUS |
|
|
POWER | VIDEO |
SELECT
ON/STAND BY
AUTO
ADJ.
OFF | ON |
|
| POWER |
|
MAGNIFY |
| |
| UP |
|
| DOWN |
|
MENU |
|
|
ENTER | EXIT |
|
| ||
Power On | Fan running | Standby |
LAMP | LAMP | LAMP |
STATUS | STATUS | STATUS |
POWER | POWER | POWER |
Steady green light | Blinking | Steady orange |
| orange light | light |
CAUTION
Do not unplug the power cable from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off)
After Use
Preparation: Make sure that the projector is turned off.
1.Unplug the power cable.
2.Disconnect any other cables.
3.Retract adjustable tilt feet if extended.
4.Cover the lens with the lens cap.
5.Put the projector and its accessories in the supplied soft carrying case.
29