3. Projecting an Image (Basic Operation)

￿Turning off the Projector

To turn off the projector:

1.First, press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [Power Off / Are you sure?] message will appear.

MENU

SELECT

LAMP

ENTER

STATUS

 

POWER

 

 

IT

X

E

 

OFF

ON

POWER

 

MAGNIFY PIC-MUTE

PAGE

 

UP

 

DOWN

MENU

 

2.Secondly, press the ENTER button or press the POWER (ON/STAND BY) or the POWER OFF button again.

The power indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds (Cool-down time).

Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds.

3.Finally, turn off the Main Power switch. The power indicator will go out.

TIP: The main power of the projector can be turned off by pressing the main power switch or by unplugging the power cable even during the cool down period after the projector is turned off.

NOTE: Do not turn off the main power within 10 seconds of making adjustment or setting changes and closing the menu.

Doing so can cause loss of adjustments and settings.

ON/STAND BY SOURCE

AUTO ADJ.

ENTER

EXIT

Power On

Fan running

Standby

LAMP

LAMP

LAMP

STATUS

STATUS

STATUS

POWER

POWER

POWER

Steady green light

Blinking

Steady orange

 

orange light

light

CAUTION:

Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating.

CAUTION:

•The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

•Do not turn off the AC power by pressing the main power switch or by unplugging the power cable when the projector is powered on. Doing so can cause damage to the projector.

27