5. Using On-Screen Menu

Enabling Security [Security]This feature turns on or off the Security function.

Unless the correct keyword is entered, the projector cannot project an image. (→ page 30)

Selecting Menu Color [Menu Color Select]You can choose between two color modes for menu color: color and monochrome.Selecting Menu Display Time [Menu Display Time]

This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [Manual], [Auto 5 sec], [Auto 15 sec], and [Auto 45 sec].

Selecting a Color for Background [Background]Use this feature to display a blue or black screen when no signal is available.

The [Background] option is not available on VT48. When no signal is available on VT48, a black screen will be displayed.

[Options]Setting Off Timer [Off Timer]

You can use the Off Timer feature to turn off the projector automatically at a preset time. Eight preset times can be selected:Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.

Setting Auto Adjust [Auto Adjust]

This feature sets the Auto Adjust mode so that the RGB image can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: Normal and Fine

Off .........................

The RGB image will not be automatically adjusted.

 

You can manually optimize the RGB image.

Normal ..................

Default setting. The RGB image will be automatically adjusted. Normally select this option.

Fine .......................

Select this option if fine adjustment is needed. It takes more time to switch to the source than when [Normal]

 

is selected.
Enabling Auto Start [Auto Start]

Turns the projector on automatically when the power cable is inserted into an active power outlet. This eliminates the need to always use the POWER button on the remote control or projector cabinet.

To use the Auto Start function, you must first press the main power switch to the position “On” (I) before plugging the power cable.

Enabling Power Management [Power Management]

When this option is selected you can enable the projector to automatically turn off (at the selected time: 5 min., 10 min., 20 min., 30 min.) if there is no signal received by any input.

45