3. Projecting an Image (Basic Operation)

￿Selecting a Source

Selecting the computer or video source

NOTE: Turn on the computer or video source equipment connected to the projector.

Selecting from Source List

Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “Computer 1”, “Computer 2 (Digital / Analog)”, ”Video” (VCR or laser disc player), “S-Video”, To display the selected source, allow 1 second to elapse.

 

MENU

 

 

SELECT

 

LAMP

ENTER

EXIT

STATUS

 

 

POWER

 

 

 

ON/STAND BY SOURCE

AUTO ADJ.

Detecting the Signal Automatically

Press and hold the SOURCE button for a minimum of 2 seconds, the projector will search for the next available input source. Each time you press and hold the SOURCE button for a minimum of 2 seconds, the input source will change as follows:

Computer1 Computer2 (Digital) Computer2 (Analog) Video

S-Video Computer1 ...

TIP:

If no input signal is present, the input will be skipped.

Using the Remote Control

Press any one of the COMPUTER 1/2, VIDEO, S-VIDEO buttons.

TIP: The COMPUTER 2 button on the remote control toggles the Computer 2 source between [Computer 2 (Digital)] and [Computer 2 (Analog)].

Selecting Default Source

You can set a source as the default source so that it will be displayed each time the projector is turned on.

1.Select [Setup] [Options] [Default Source Select] from the menu.

The [Default Source Select] screen will be displayed.

2.Select a source as the default source, and press the ENTER button.

3.Press the EXIT button a few times to close the menu.

4.Restart the projector.

The source you selected in step 2 will be projected.

(page 45)

 

MENU

 

 

SELECT

 

LAMP

ENTER

EXIT

STATUS

 

 

POWER

 

 

 

ON/STAND BY SOURCE

AUTO ADJ.

L-CLICK

 

R-CLICK

 

MOUSE

 

VIDEO

COMPUTER AUTO ADJ.

 

1

 

S-VIDEO

 

LAMP MODE

 

2

 

VOLUME

ASPECT

HELP

 

PICTURE

FREEZE

20