4. Convenient Features

￿Changing Lamp Mode

This feature enables you to select two brightness modes of the lamp:

Normal and Eco modes. The lamp life can be extended by using the Eco mode.

Lamp Mode

Description

Status of LAMP indicator

 

 

 

 

Normal Mode

This is the default setting (100%

Off

LAMP

STATUS

 

Brightness).

 

 

 

POWER

 

 

 

 

 

 

 

Eco Mode

Select this mode to increase the

Steady Green light

LAMP

 

lamp life (approx. 80% Brightness).

 

STATUS

 

 

 

POWER

 

 

 

 

To change to the [Eco] mode, do the following:

1.Press the LAMP MODE button on the remote control to display [Lamp Mode] screen.

2.Use the SELECT  or  button to select [Eco] mode.

3.Press the ENTER button.

To change from [Eco] to [Normal], Go back to Step 2 and select [Normal]. Repeat Step 3.

NOTE:

•The Lamp Mode can be changed by using the menu. Select [Setup] → [General] → [Lamp Mode].

•The lamp life remaining and lamp hours used can be checked in [Usage Time]. Select [Information] →[Usage Time].

•If the projector is overheated in Normal mode, there may be a case where the Lamp mode automatically changes to Eco mode to protect the projector. When the projector is in Eco mode, the picture brightness decreases. When the projector comes back to normal temperature, the Lamp mode returns to Normal mode.

Thermometer symbol [ ] indicates the lamp mode is automatically set to Eco mode because the internal temperature is too high.

￿Preventing the Unauthorized Use of the Projector

To enable the Security function:

1. Press the MENU button.

The menu will be displayed.

2. Use the SELECT  or  button to select [Setup] and press the ENTER button.

3.Use the SELECT  or  button to select [Installation].

4.Use the SELECT  or  button to select [Security] and press the SELECT  button.

29