Operation
Fill water system
If the coffee machine cannot pump water although there is water in the tank, the water circuit may be empty.
Procedure to fill water system:
1.Perform steps 1 to 5 for preparation (see page 8).
2.Open closing handle in vertical position.
3.Press button "large cup".
4.Press and hold closing handle to rear end position.
5.Observe capsule inlet for appearing water.
6.Press down closing handle immediately when first droplets are visible.
7.Press button "large cup" again to stop water flow.
2 |
3 |
6 |
5 | 4 |
7
Service Manual EF 473 / EF 474 | 9 | Version 1.0 en |
