IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
•Read all instructions carefully.
•In case of emergency, immediately remove plug from power outlet.
•Do not touch hot surfaces. Use levers or knobs.
•To protect against fire, electric shock and personal injury, do not immerse cord, plug or appliance in water or other liquid. Never clean the appliance or the power cord if those are humid.
Avoid touching the machine with wet hands.
•Close supervision is required when any appliance is used by or near children.
•Unplug appliance when not in use, before cleaning or if leaving for an extended period of time (vacation, etc).
•Allow to cool before adding or removing parts, and before cleaning the appliance.
•Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
•The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or personal injury.
•Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn off appliance, then remove plug from wall outlet.
•Do not use appliance for other than intended purposes.
•Do not put fingers inside capsule housing, due to sharp edges.
•Do not let cord hang over edge of table or counter, or touch hot surfaces.
•Do not place on or near a hot gas or electric burner, or in a heated oven.
POWER CORD INSTRUCTIONS
Regarding your power cord:
a)A short power cord is provided to reduce risks that may result from longer and tangled cords.
b)Longer extension cords may be used in accordance with the manufacturers‘ instructions.
c)If a long detachable
(3) the longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
d)This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
1
