10/100 Port Aggregator Tap
DIP Switch | Power DC Jacks |
/1 2 3 4 5 6 7 8
.
Figure 3: Rear Panel
LED Indicators
•PWR 1/ PWR 2: Main and Redundant Power. .If the Tap is deployed with both power supplies, both LEDs will illuminate when the Tap is plugged in. . If an LED is off, this indicates that the corresponding power supply is not functioning..
Additional Port Aggregator Tap LEDs are located in the upper left and right hand corners of the RJ45 connectors for Port A, Port B, Port 1 and Port 2
•10/100 Indicator: If the Port is set to 10 Mbps, the LED illuminates or- ange. .If the Port is set to 100 Mbps, the LED illuminates green. .
•Link/Activity Indicators: If a good link is established, the LED illu- minates a steady green. .If there is current activity on this link, the LED flashes.
