Internet
Home
Telephone
| To LINE/DSL port |
Telephone |
|
Wall Socket |
|
Splitter with | ADSL Broadband Modem |
Microfilter |
|
Computer with
To 12V DC |
POWER port |
To WAN port
Wireless
Router
To ETHERNET port
(1, 2, 3, 4 on
4 port models)
Connecting your Router
Ethernet Card
AAttach your antennas. Place your router next to your modem. Unplug your modem’s power cord.
BLocate the networking cable that connects your modem and computer. Unplug that cable from your modem, and plug it into any LAN port on the back of the 900n Series Router.
CFind your new networking cable (included in the box with your 900n series Router) and connect it to the WAN port on the back of the 900n Series Router. Connect the other end to your modem’s LAN Port.
DPlug in your modem’s power cord. Wait 60 seconds for the modem to start up. Plug the 900n Series Router’s power supply into the power socket on the back. Plug the other end into the wall outlet. Turn on the power outlet.
EWait 20 seconds for the Router to start up. Look at the display on the front of the Router. Make sure the “Power”, “LAN” and “WAN” icons are lit up in blue. If they are not, recheck your connections.
Powern Series User Guide | YML800NX |
12 | www.netcomm.com.au |
