Manuals / NetComm / Computer Equipment / Network Router

NetComm IG6000 manual Industrial Modem User Guide

Models: IG6000

1 23
Download 23 pages 53.32 Kb
Page 5
Image 5

Industrial Modem User Guide

If your modem ever suffers physical damage that causes its internal parts to become exposed, it should be disconnected from the phone line immediately. The modem must then be repaired before reconnection to the phone line is permissible.

Should it be necessary to physically move your modem, disconnect it from the phone line or earthing lead before disconnecting the power connection. When reconnecting your modem, reconnect the power or earthing lead before reconnecting it to the phone line.

Some parameters required for compliance with TelecomÕs PTC Specifications are dependent on the equipment connected to the RS 232 port. The connected equipment shall be set to operate within the following limits for compliance with Telecom Specifications:

1.Equipment connected to the RS 232 port shall be certified to meet the requirements of Reg. 18 of the New Zealand Wiring Regulations 1976.

2.When the user manually initiates a call, via equipment connected to the RS232 port, the equipment shall operate within the following restrictions:

a.Not more than 5 call attempts shall be made to the same number within a one hour period.

b.There shall be at least 60 seconds between call attempts.

c.Not more than a total of 10 call attempts shall be made to the same number for any single manual call initiation.

d.Automatic calls to different numbers shall be not less than 5 seconds apart.

FAILURE TO MEET THE ABOVE REQUIREMENTS MAY NEGATE THE USER RIGHTS UNDER THE TELECOM TERMS OF SERVICE.

When operating in V.22bis or V.22 mode over some older telephone exchanges, it may be necessary to issue the &G2 command.

Setting the S0 register (auto­answer) to S0 = 1 or to values greater than 5 will render this equipment non­compliant with the Telepermit requirements.

This equipment does not provide a guard tone with the V.22 and V.22bis answer modes. In some circumstances this could cause interference with the telephone network signalling systems, and could result in lost calls. Telecom will not accept responsibility should such problems occur. Such occurrences will be rare.

The preferred method is to use DTMF tones (ATDT...) as this is faster than pulse (decadic) dialling, and is available on most New Zealand telephone exchanges. Where DTMF is not available and decadic must be used, your communications software must be set up to record numbers according to the following translation table as the modem is not directly compatible with the New Zealand (10­N) Reverse dialling standard.

Number to be dialled

Number to program into computer

00

19

28

37

46

55

64

73

82

91

Note that where DTMF dialling is used, the numbers should be entered normally.

YML391­3A

5

Page 4 Page 6
Page 5
Image 5
NetComm IG6000 manual Industrial Modem User Guide
Page 4 Page 6

IG6000 specifications

The NetComm IG6000 is a cutting-edge industrial-grade router designed to meet the growing demands of IoT applications, industrial automation, and remote monitoring. Built for robustness and reliability, the IG6000 caters to sectors such as manufacturing, transportation, and utilities, where stable connectivity is paramount for operational efficiency.

One of the defining features of the IG6000 is its versatility. It supports multiple connectivity options, including 4G LTE, Ethernet, and Wi-Fi, ensuring that devices remain connected even in challenging environments. The integrated cellular connectivity enables organizations to extend their networks to remote locations without the need for costly infrastructure. This makes the IG6000 an ideal choice for applications like smart cities, remote asset management, and telemetry systems.

The router’s rugged design is another standout characteristic. Designed to withstand extreme temperatures, dust, and moisture, the IG6000 is compliant with IP30 standards, ensuring that it can operate effectively in industrial settings. Its durability minimizes the risk of downtime, a crucial factor for businesses that rely on continuous data transmission and real-time insights.

Security is paramount in industrial environments, and the IG6000 addresses this with advanced features such as built-in firewalls, VPN support, and secure encryption protocols. These security measures help to protect sensitive data and ensure compliance with industry standards.

The IG6000 also boasts extensive configuration capabilities. Users can customize network settings and manage connected devices through a user-friendly interface. Additionally, the router supports cloud management, providing IT teams with the ability to monitor performance remotely and make necessary adjustments in real time.

Another significant aspect of the IG6000 is its support for edge computing. By enabling data processing at the edge of the network, organizations can achieve faster response times and reduced latency. This is particularly beneficial for applications that require immediate processing, such as predictive maintenance systems or real-time inventory management.

Lastly, the NetComm IG6000 is designed with scalability in mind. Businesses can seamlessly integrate additional devices and sensors as their operations grow, making it a future-proof solution. Overall, the IG6000 stands out as a reliable, secure, and efficient router, perfectly positioned to support the evolving landscape of industrial connectivity and IoT applications.