Thank you for purchasing a genuine NetComm product.
Follow the steps in this Quick Start Guide to correctly install your InModem56 V.92 and begin data, fax and voice communications.
What’s in the Box?
■NetComm InModem 56 V.92 ( IN5699_4)
■
■Quick Start User Guide
■NetComm Driver CD
■NetComm Product CD
CAUTION
This device should be fitted and installed under normal operation. Any damage caused by abnormal installation or operation is not included in the manufacturer’s warranty.
Your NetComm Driver CD contains all the drivers, manuals and software that you will need to fully utilise your NetComm InModem56.
Step 1 - Installing your Modem
To install the NetComm InModem 56 V.92 into your computer, you may wish to refer to the user’s manual for your computer and follow the instructions below.
1.Ensure the computer is shut down correctly, with the power off and the power cable unplugged, before beginning installation of your InModem56.
2.Take the cover off the CPU (central processing unit) and carefully slip the modem into the appropriate vacant PCI slot. Ensure the “golden edge” of the modem card is correctly positioned so it easily fits into a PCI slot.
NOTE: Do not force it.
Rev.2 - YML609 | www.netcomm.com.au |
InModem56 V.92 | Page 3 |
