Contents |
|
Introduction | 3 |
What’s in the box | 3 |
Minimum System Requirements | 3 |
Installing your Modem | 4 |
Step 1 – Install the NB100 in your Computer | 4 |
Do you need a Line Filter or Splitter? | 5 |
Step 2 – Install the Modem Driver | 5 |
NB100 Modem Analyzer Utility | 6 |
General Tab | 7 |
Statistics Tab | 8 |
Spectrum Tab | 9 |
Configuration Tab | 10 |
How to Uninstall the NB100 Modem | 11 |
Appendix A: Cable Information | 12 |
Appendix B: Glossary | 14 |
Appendix C: Registration and Warranty Information | 18 |
Caution
The NetComm NB100 must be installed and operated in accordance with the instructions provided in this Quick Start Guide. Damage caused by incorrect or careless installation is not covered by warranty.
Static Electricity
Computers are very sensitive to static electricity which may be discharged by the user when the internal circuitry is touched. Ensure that you have discharged any static prior to touching the computer’s PCI slots and to removing the NetComm NB100 from its static bag, by touching an earthed object first. This can be the computer’s Power Supply provided the power is switched off at the wall, but the power cord is connected
to the power socket; static will be discharged through the power cord’s earth connection.
2 | NB100 Quick Start Guide |
| YML783 Rev1 |