NetComm NP5410 manual Security Tab

The Security Tab

Enable WEP:	Allows you to enable or disable Wired Equivalency
	Privacy (WEP) for encryption, with either 64- or 128-
	bit encryption. For the most secure use of WEP, also
	select "Deny Unencrypted Data" and set Authentication
	to "Shared Key" when WEP is enabled

Default WEP key to use:

Select the key to be used as the default key. Data transmissions are always encrypted using the default key. The other keys can only be used to decrypt received data

Deny unencrypted data:	Select this to require peers to use encryption. This is
	only effective when WEP is enabled.
Authentication:	Select the type of authentication used when connecting
	to an access point. 'Open' is used if anyone can connect
	to the AP. 'Shared key' is used if both devices must
	know the encryption key.
WEP key lengths:	Enables you to choose either a 64- or 128-bit encryption
	scheme. Be sure that the NP5410’s WEP key must be
	the same as the AP’s, otherwise NP5410 still can not
	communicate with wireless LAN.

www.netcomm.com.au	Rev. 1 - YML675
Page 18	NP5410 Wireless Ethernet Bridge User Guide