NetComm NP5410 manual WEP key 1 ~

WEP key 1 ~ 4:	Enables you to create an encryption scheme for Wireless
	LAN transmissions. You can manually enter a set of
	values or use pass phrase to generate WEP keys.
	For 64-bit WEP encryption, a key of 10 hexadecimal
	characters in length must be filled in.
	For 128-bit WEP encryption, a key of 26 hexadecimal
	characters in length must be filled in.. Be sure that the
	key in the AP shall be the same as in NP5410, otherwise
	the communication will not work.
Enter pass phrase:	Enter a pass phrase and click “generate” to generate
	WEP keys from pass phrase.

Note: Some APs do not support 128-bit encryption

Note: 128-bit encryption requires more system resources than 64-bit encryption. Use 64- bit encryption for better performance.

WEP key to use:	Sets which WEP key (1 ~ 4) to use when sending data.
	To connect to a Wi-Fi compliant wireless device, key #1
	must be selected.

Note: You may need to reboot the NP5410, and then re-load the page to see any new settings.

Rev. 1 - YML675	www.netcomm.com.au
NP5410 Wireless Ethernet Bridge User Guide	Page 19