NetComm NP642 manual III. Advanced

III. Advanced

In the Advanced page you can configure advanced settings for the NP642 wireless PCI Card

FieldDescription

Encryption: There are four options available: Disable (WEP), Enable (WEP), WPA and WPA-PSK. The default setting is set to “Disable”. Enable and Disable refer to WEP data encryption feature. If Enable is selected, you will be required to select the Authentication mode from the drop down list. If WPA is selected, configuration is enabled. Select the “configuration” button.

You will then be prompted with the following pop up window.

NP642 IEEE 802.11g PCI Adapter	19
YML785 Rev1