NetComm NP6800 manual File Menu

File Menu

Under this menu you can find the following options:

■Connect to Access Point - Using this option you can directly connect with the AP.

First, type its IP Address in the panel which appears (Figure 4-2). Then, type the appropriate password in the Community field (The default password is “public”).

■Find Access Point - This option allows you to find and connect with an AP without the necessity of knowing its IP Address. Choose this option in order to find the Aps available for connection . Select one of the available APs and press “Connect”. Then, the IP of the selected AP is passed to the IP field of the panel to write the appropriate password at the community field.

■Close Connection AP - Terminates the connection with the AP.

■Exit - Terminates the connection with the AP and exits the application.

Rev.1 - YML655	www.netcomm.com.au
NP6800 - Wireless LAN Access Point	Page 21