NetComm V100 manual SIP Tab, Local

SIP Tab

Clicking on the SIP tab brings up the following window:

Local

The sub-tab labelled Local has the following sections:

■Host

■Phone Configuration

■Proxy and Registrar

Let us take a look at these sections now.

Host

Max Digits (1-24):	Indicates the maximum number of digits (numbers) you can dial
	using the V100 ATA. Default: 24.
Port No.:	The port on the host used to communicate with the remote end.
	Default: 5060. This port can be changed.
MaxRings:	The number of rings before an incoming call is answered.
	Default: 15. Maximum is 50.
Use Proxy:	In order to use the V100 ATA with a VoIP service provider you
	will need to specify a Proxy server which the V100 ATA
	communicates with. Choose Yes and enter the details under the
	Proxy and Registrar section. Choose No if you only want to use
	the V100 in Peer-to-Peer mode. (Refer to the section on
	Telephone Book Tab for instructions.)

V100 User Guide	YML749Rev1
20	www.netcomm.com.au