RangeMax Wireless-N 150 Router WPN824N Setup Manual
Router Front Panel
Figure 2
You can use the status lights on the front of the wireless router to verify various conditions.
Table 1-1. Status Light Descriptions
Item | Function | Activity | Description |
|
|
|
|
1 | Power | On green solid | Power is supplied to the router. |
| Off | Power is not supplied to the router. | |
|
| ||
|
|
|
|
| Test | On | The unit is performing the |
2 |
| Off | The unit successfully completed the |
| Slow blinking | The reset button is being pushed, restoring the factory default | |
|
| ||
|
|
| settings. |
|
|
|
|
| Wireless | On | The wireless interface is enabled. |
3 |
| Off | The wireless interface is turned off. |
| Blinking | Data is being communicated over the wireless network. | |
|
| ||
|
|
|
|
| Internet | Amber off | No Ethernet cable is connected to the modem. |
|
| Amber on | The Ethernet cable connection to the modem is good. |
|
| Amber blinking | Packets are being transmitted and received from a modem or other |
4 |
|
| network device, but no IP address has been received. |
|
| No IP address has been received. | |
|
| Green off | |
|
| IP address has been received. | |
|
| On | |
|
| IP address received and data is being transmitted and received. | |
|
| Blinking | |
|
|
| |
|
|
|
|
5 | LAN | Green | The LAN port has detected a 100 Mbps link with an attached device. |
| Amber | The LAN port has detected a 10 Mbps link with an attached device. | |
|
| ||
|
|
|
|
Getting to Know Your Wireless Router | 3 |
v1.0, November 2009
