NETGEAR 2409 First, Assemble and Mount the Antenna, 3TEP  3TEP  3TEP  3TEP , 3TEP  3TEP 

Installation Guide for the 9 dBi Omni-directional Antenna ANT2409

First, Assemble and Mount the Antenna

3TEP 

3TEP 

3TEP 

3TEP 

3TEP 

3TEP 

Step	Procedure
Step 1	Feed the antenna cable through the antenna
	mounting assembly.
	Note: Use the correct cable.
	• Outdoors: use the provided 2m antenna
	cable.
	• Indoors: use the provided N/SMA adapter
	with a Netgear cable model
	ACC-10314-01, 02, 03, 04 or 05 (sold
	separately). For indoors, do not use the
	provided 2m cable.
Step 2	Securely attach the antenna cable by screwing
	it onto the antenna.
Step 3	Insert the antenna into the mounting assembly.
Step 4	Position the key slot on the antenna so that it
	is aligned with the mounting screw hole
	illustrated in step 5.
Step 5	Tighten the mounting screw so that it fits in the
	key slot on the antenna.
Step 6	Attach the assembled antenna to the mounting
	surface with the appropriate hardware (U-bolts
	for pole mount, L-bracket or no bracket for flat
	mount).
	Note: The antenna can be mounted vertically
	right-side-up or up-side-down.

Figure 2-1: Antenna Assembly and Mounting

#ABLE !SSEMBLY

2-2 Installing the 9 dBi Omni-directional Antenna