NETGEAR 7000 Example 2: Add the ports to the LAGs:, Example 3: Enable both LAGs.

NETGEAR 7000 Series Managed Switch Administration Guide
4-4 Link Aggregation
v1.1, May 2006
Example 2: Add the ports to the LAGs:
Example 3: Enable both LAGs.
By default, the system enables link trap notification
At this point, the LAGs could be added to VLANs.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 0/2
(Netgear Switch) (Interface 0/2)#addport 1/1
(Netgear Switch) (Interface 0/2)#exit
(Netgear Switch) (Config)#interface 0/3
(Netgear Switch) (Interface 0/3)#addport 1/1
(Netgear Switch) (Interface 0/3)#exit
(Netgear Switch) (Config)#interface 0/8
(Netgear Switch) (Interface 0/8)#addport 1/2
(Netgear Switch) (Interface 0/8)#exit
(Netgear Switch) (Config)#interface 0/9
(Netgear Switch) (Interface 0/9)#addport 1/2
(Netgear Switch) (Interface 0/9)#exit
(Netgear Switch) (Config)#exit
(Console) #config
(Console) (Config)#port-channel adminmode all
(Console) (Config)#exit